The central laboratory bench is a major component of laboratory furniture. It is suitable for placement in the middle of the laboratory and is the primary platform for conducting experimental activities.
I. Components:
1. Countertop:
The countertop uses 16mm epoxy resin board.
2. Cabinet:
The cabinet is made of 18mm thick Grade I national melamine double-faced medium-density molded board. Cabinet doors and drawer fronts are edge-banded with 2mm thick PVC edge banding, and all edge-banded joints are treated with rounded transitions.
3. Connectors:
The connectors use nylon embedded nuts, high-quality zinc alloy connecting rods, and zinc alloy eccentric cam three-in-one connectors, ensuring both firm durability and ease of assembly and transport.
4. Hinges:
Zinc alloy hinges are used, with two-stage force and a door opening angle of 110 degrees.
5. Drawer slides:
The drawer slides use self-closing silent slides. The slide steel plate thickness is 1.2mm, and the rollers use pure nylon material. Alternatively, 450mm black two-section steel slides can be used according to user requirements.
6. Cabinet door and drawer handles:
According to user requirements, zinc alloy U-shaped matte handles, recessed handles, or edge-banding handles may be selected.
7. Power supply:
Each unit-length laboratory bench or side bench is equipped with domestic high-quality power sockets.
II. Product Features
1. Corrosion-resistant materials
1-1. Central laboratory bench corrosion-resistant countertop: Uses Shanghai Rongde ceramic board, thickness 20mm. The overall countertop has advantages such as resistance to strong acids and bases, wear resistance, oil resistance, heat resistance, impact resistance, non-toxicity, odorlessness, antibacterial properties, aging resistance, mold resistance, waterproofing, fireproofing, and moisture resistance. It is an ideal green building material for laboratories.
2. Upper and lower cabinets and door panels
2-1. Shell material: Made of brand-new 1.2mm thick galvanized steel sheet, treated with anodic film processing. Treated with acid- and alkali-resistant EPOXY coating and baking.
2-2. Internal materials (side panels, back panels, top panels, baffles): Use 6mm thick chemical-resistant board.
2-3. Baffle fixing seats: Made of PC material, integrally molded, movably combined for convenient disassembly, and have the function of fixing synthetic racks.
2-4. Air collection hood: Made of 5mm thick PP material.
2-5. Auxiliary semicircular ventilation holes: Made of 1.2mm thick galvanized steel sheet, integrally formed by stamping, and treated with EPOXY spray coating.
3. Adjustable door system:
3-1. Movable sliding door: Single-sided up-and-down operation, equipped with a balancing device. The sliding door can stop at any position.
3-2. Sliding door glass: 5mm thick tempered glass.
3-3. Sliding door suspension cable: Cable tensile strength 450 kg, compliant with CNS1111 G2009 tensile test report.
3-4. Glass handle: Made of aluminum alloy, treated with EPOXY spray coating.
4. Drainage device:
4-1. Laboratory sink: Made of PP integrally molded, thickness 3m/m, elastic, acid- and alkali-resistant, heat-resistant, and resistant to organic solvents. Dimensions: L260 × W115 × H147mm (NP01-1)
4-2. Trap: Made of PP injection molding, anti-siphon bottle-type trap.
5. Water supply device:
5-1. Water supply cock: Made of cast copper single-outlet water supply cock.
5-2. Flow control valve: Made of copper control valve, ceramic valve core.
6. Gas supply device:
6-1. Gas cock: Made of cast copper single-outlet gas cock.
6-2. Gas safety snap-lock valve: Copper surface treated with acid- and alkali-resistant paint coating and baking to prevent acids, bases, and rust. Its switch uses a safety snap-lock valve to enhance safety in use and prevent accidental touching of the switch, thereby avoiding danger.
