Usage
This Furnace Is Mainly Used for The Production of
Working Zone Size
φ1100×2000
Max. Temperature (°c)
2600
Temperature Uniformity (°c)
±20
Furnace Door
Screw/Hydraulic/Manual Elevation; Manual Tight/ Au
Furnace Vessel
All Carbon Steel/Inner Layer Stainless Steel/All S
Furnace Hot Zone
Soft Carbon Felt/Soft Graphite Felt/Rigid Composit
Heating Element
Isostatic Press Graphite/High Purity, Strength and
Muffle
Press High Purity, High Purity, Strength and Densi
Process Gas System
Volume/Mass Flow-Meter
Thermocouple
C Type/ S Type/ K Type/ N Type
Pyro-Meter
Single Color/Dual-Color; Chino/Raytek
Transport Package
Wooden Box
Specification
φ 1100× 2000
This furnace is mainly used for the production of high performance brake disc used in Automobile, Bullet train, Tank, Aircraft and etc.
Technology process:
1.Carbon fiber preform → high temperature treatment → pressure infiltration → carbonization → machining → graphitization → ceramization → subsequent process
2.Carbon fiber preform → high temperature treatment → CVD → machining → graphitization → ceramization → subsequent process
The parameters can be adjusted according to the process requirements, but not as the acceptance standard. The detailed specifications will be described in the technical proposal and agreement.
| C-C / Carbon-ceramic Brake Disc Preparation Equipment |
| Equipment Type | Chemical vapor deposition furnace | Vacuum graphitization furnace |
| Spec/Model | VCVD-0610-C | VCVD-1120-C | HCVD-121220-C | VIG-0610-C | VIG-1120-C | HVG-131320-C |
| Working Zone Size (W × H × L) (mm) | φ600×1000 | φ1100×2000 | 1200×1200×2000 | φ600×1000 | φ1100×2000 | 1300×1300×2000 |
| Max. Temperature (°C) | 1200 | 1200 | 1200 | 2600 | 2600 | 2600 |
| Temperature Uniformity (°C) | ±5 | ±7.5 | ±15 | ±15 | ±20 | ±15 |
| Ultimate Vacuum (Pa) | 50 | 50 | 50 | 50 | 50 | 50 |
| Equipment Type | Siliconizing furnace | Vacuum carbonization furnace | Vacuum pressure Infiltration furnace |
| Spec/Mode | ISII-0610 | ISII-1120 | VSII-121220 | VVC-0608 | VVC-1120 | VPI-0608 | VPI-1120 |
| Usable Space (W × H × L) (mm) | φ600×1000 | φ1100×2000 | 1200×1200×2000 | φ600×800 | φ1000×1500 | φ600×800 | Φ1000× 2000 |
| Max. Temperature (°C) | 2000 | 2000 | 2000 | 1000 | 1000 | 400 | 400 |
| Temperature Uniformity (°C) | ±15 | ±20 | ±15 | ±10 | ±10 | ±10 | ±10 |
| Ultimate Vacuum (Pa) | 50 | 50 | 50 | 50 | 50 | 50 | 50 |
| Max. Pressure (MPa) | / | / | / | / | / | 5 | 5 |
| The above parameters can be adjusted to the process requirements, they are not as acceptance standard, the detail spec. will be stated in the technical proposal and agreements. |
1.Furnace door: screw/hydraulic/manual elevation; manual tight/ auto lock-ring tight
2.Furnace vessel: all carbon steel/inner layer stainless steel/all stainless steel/Q345
3.Furnace hot zone: soft carbon felt/soft graphite felt/rigid composite board/Refractory brick+ceramic fiber /CFC
4.Heating element : isostatic press graphite/high purity, strength and density graphite/Ni-Cr; Fe-Cr-Nb
5.Muffle: press high purity, high purity, strength and density graphite/fine size graphite/SUS310S
6. Process gas system: volume/mass flow-meter
7.Thermocouple: C type/ S type/ K type/ N type
8.Pyro-meter: Single color/Dual-color; CHINO/Raytek
